

ABRO Bowie-Dick Test
Single-use Bowie & Dick test pack, designed to test the capability of vacuum sterilizers regarding steam penetration and residual gas removal.
Contact us

Biological indicator – Geobacillus Stearothermophilus 24-hour steam sterilization (autoclave) vial
Autonomous biological indicator with results available within 24 hours (vials containing Geobacillus stearothermophilus spores), designed to monitor the effectiveness of steam sterilization cycles.
Contact us

Biological indicator – Geobacillus Stearothermophilus steam sterilization (autoclave) vial, 19 min rapid read
Rapid, self-contained biological indicator with results in 19 minutes (vials containing Geobacillus stearothermophilus spores), designed to monitor the effectiveness of steam sterilization cycles. Compatible with commercially available automated fluorescence readers, making it ideal for obtaining rapid results in clinics and hospitals. Available in boxes of 100 units.
Contact us

Biological indicator – Geobacillus Stearothermophilus steam sterilization (autoclave) vial, 1h rapid read
Rapid, stand-alone biological indicator with results in 1 hour (vials containing Geobacillus stearothermophilus spores), designed to monitor the effectiveness of steam sterilization cycles. Compatible with commercially available automated fluorescence readers, making it ideal for obtaining rapid results in clinics and hospitals. Available in boxes of 100 units.
Contact us

Biological indicator – VH2O2 Geobacillus Stearothermophilus plasma sterilization vial, 24 min rapid read
Autonomous biological indicator for monitoring hydrogen peroxide (plasma) steam sterilization, with rapid results in 24 minutes. It contains Geobacillus stearothermophilus spores and provides a rapid and reliable result through fluorescence detection and color change.
Contact us

Biological indicator – VH2O2 Geobacillus Stearothermophilus plasma sterilization vial, 8 hours
Autonomous biological indicator with results in 8 hours (vials containing Geobacillus stearothermophilus spores), specifically designed to monitor the effectiveness of hydrogen peroxide vapor (plasma) sterilization cycles.
Contact us

Container seal, long model, with steam chemical indicator
Long-model plastic seals with an integrated chemical indicator are designed to secure sterilization containers. They ensure load traceability and prevent unauthorized access to sterilized instruments.
Contact us

Enzymatic Foaming Detergent, Deconex FOAM ACTIVE – 5L canister
Enzymatic pre-cleaning foam for the direct treatment of surgical instruments immediately after use. It effectively prevents the drying of blood and organic residues and inhibits the formation of microbial biofilm on surfaces and within lumens for 72 hours.
Contact us

Enzymatic Foaming Detergent, Deconex FOAM ACTIVE – 0.5L spray bottle
Enzymatic pre-cleaning foam for the direct treatment of surgical instruments immediately after use. It effectively prevents the drying of blood and organic residues and inhibits the formation of microbial biofilm on surfaces and within lumens for 72 hours.
Contact us

Flat sterilization reels with two Type 1 chemical indicators (steam and EO) printed on the film.
Sterilization reels with indicators (steam, ethylene oxide) integrated into the film. This solution ensures a high level of safety and represents the ideal choice for the sterilization of medical and surgical instruments.
Contact us

Flat sterilization rolls with two Type 1 chemical indicators (steam and EO)
Sterilization rolls with indicators (steam, ethylene oxide) printed on medical-grade paper, featuring effective water impermeability.
Contact us

Flat sterilization rolls with two Type 1 internal chemical indicators (steam and EO).
Sterilization reels with indicators (steam, ethylene oxide) integrated into the film. This solution ensures a high level of safety and represents the ideal choice for the sterilization of medical and surgical instruments.
Contact us

GKE double-sided traceability labels
Double-sided traceability labels, GKE, 25 x 31 mm, with Type 1 steam indicator. Compatible with the GKE pistol-style applicator.
Contact us

GKE Traceability Label Applicator
Manual labeling machine with 3 lines of print, designed to ensure complete traceability of sterilized products and facilitate inventory management in clinics and hospitals.
Contact us

Gusseted sterilization rolls with two chemical indicators (steam and EO)
Sterilization rolls with 2 indicators (steam, ethylene oxide) printed on medical-grade paper, featuring effective water resistance.
Contact us

Incubator with an aluminum block and incubation temperature of 55–60°C
Compact incubator with an aluminum block, designed for incubating biological indicators at a stable temperature of 55–60 °C. Equipped with 15 11-mm slots and an integrated vial crusher.
Contact us

Ink Cartridge for GKE Label Applicator
The ink cartridge is an essential component for the proper functioning of the manual applicators used in the daily labeling of sterile materials. Specifically designed to withstand the demands of the medical environment, this cartridge ensures uniform ink transfer onto the labels.
Contact us

Ink Cartridge for the PRINTEX Label Applicator
Ink cartridge compatible with the PRINTEX label applicator, ensuring clear, durable, and long-lasting printing on traceability labels.
Contact us

Instant G. Stearothermophilus 10⁶ Biological Indicator for Steam Sterilization at 132–137°C, 24-hour Incubation
Autonomous biological indicator (SCBI) with immediate release for monitoring steam sterilization. Contains Geobacillus stearothermophilus spores and an integrated Type 5 chemical indicator, allowing for an instant visual assessment at the end of the cycle, followed by incubation in a standard incubator (55–60 °C).
Contact us

LifeClean – High-level disinfectant for the surfaces of noninvasive medical devices – 1L spray
High-level disinfectant with a broad spectrum of activity, evaluated for use on noninvasive medical devices under soiled conditions. It is based on chlorine dioxide (ClO₂) at a nominal concentration of 400 PPM and acts quickly, within 0.5–2 minutes.
Contact us

PCD Helix + Bowie & Dick Test – Steam Simulation Kit
The PCD Helix (Process Challenge Device) is designed for daily verification of steam penetration and detection of non-condensable (inert) gases in pre-vacuum sterilizers.
Contact us

PCD Helix Test – Steam Simulation Kit
The PCD Helix (Process Challenge Device) is designed for daily verification of steam penetration and detection of non-condensable (inert) gases in pre-vacuum sterilizers.
Contact us

PCD Steam Penetration Monitoring Device, Bowie Dick + Helix (blue) – reusable
The reusable Compact-PCD device (blue) monitors air removal and steam penetration, combining the requirements of the Bowie-Dick test and the Helix test into a single system.
Contact us

Printex double-sided traceability labels
Double-sided adhesive labels for traceability, 29 x 28 mm, with Type 1 steam indicator. Compatible with the Printex applicator.
Contact us

PRINTEX Traceability Label Applicator
Printex Medical manual labeling device (applicator) with 3 rows of printing, specially designed for quick and easy traceability of sterile packages in clinics and hospitals. It allows for clear printing of essential data (batch number, production and expiration dates, operator) directly onto self-adhesive labels.
Contact us

Ribbon (cartridge) for SATO traceability label printer
Thermal transfer ribbon (black ink ribbon), specially designed for printing on various types of labels (paper or plastic). It ensures clear, fast, and smudge-resistant printing, preventing labels from slipping during printing.
Contact us

SATO double-sided traceability labels
SATO double-sided traceability labels, 45 x 25 mm, featuring two Type 1 indicators for steam and plasma. Designed for use with SATO printers, which enhance productivity by reducing processing time.
Contact us

SATO Medical Printer with Antimicrobial Housing for Traceability Labels
The SATO label printer is an advanced, compact, and fully autonomous technological solution, specifically designed to meet the most demanding requirements in the medical, dental, and pharmaceutical fields. Equipped with a special antimicrobial housing that is easy to disinfect with chemical solutions, it significantly reduces the risk of nosocomial infections.
Contact us

Self-sealing sterilization pouches with dual steam and EO indicators
The pouches are designed to provide an excellent barrier for reprocessed medical devices and are recommended for medical facilities that do not have sealing equipment.
Contact us

Sterilization Kit: Packaging + Monitoring + Traceability
Set consisting of: 1 roll of flat sterilization paper, 500 Type 5 steam-activated chemical indicators, and 500 double-sided Printex labels for traceability.
Contact us

Type 5 chemical integrators
Type 5 laminated integrators for autoclave sterilization at 121–135°C. They monitor all critical parameters of the steam sterilization cycle: time, temperature, and steam saturation.
Contact us

Type 5, self-adhesive chemical integrators
Self-adhesive, laminated Type 5 integrators for autoclave sterilization at 121–135°C. They monitor all critical parameters of the steam sterilization cycle: time, temperature, and steam saturation.
Contact us

TYVEK-type plasma rolls
Disposable rolls designed for low-temperature chemical sterilization using hydrogen peroxide (plasma). Compliant with EN868 and ISO11607 standards.
Contact us

ULTRA sterilization rolls for steam sterilization of heavy instrument sets
Key benefits: • Steam sterilization indicator. • Easy opening: opens easily without leaving fibers or residue. • Maximum safety: high resistance to tearing and moisture, ensuring the sterility of instruments is maintained. • Ensures sterility maintenance for 12 months post-sterilization. • Compliant with EN 868 and ISO 11607 standards.
Contact us